|
600KN 1000KN微機控制電液伺服井蓋壓力疲勞試驗機
1.簡介
600KN 1000KN微機控制電液伺服井蓋壓力疲勞試驗機用于既可以用于檢測井蓋或箅子的承載能力，殘余變形也可以用于測量井蓋或箅子的壓力疲勞試驗。
2.試驗方法
GB/T 23858檢查井蓋 manhole cover
GB 26537 鋼纖維混凝土檢查井蓋 Steel fiber reinforced concrete manhole cover
JC/T 948 鋼纖維混凝土水箅蓋 steel fiber reinforced concrete water outlet cover
JC 889 鋼纖維混凝土檢查井蓋 steel fiber reinforced concrete checking well cover
CJ/T 211 聚合物基復合材料檢查井蓋inspection manhole lid made of polymer matrix composites
CJ/T 327 球黑鑄鐵復合樹脂檢查井蓋spheroidal graphite cast iron composite resin manhole cover
JC/T 1009 玻璃纖維增強塑料復合檢查井蓋glass fiber reinforced composite inspection well lid
CJ/T 3012 鑄鐵檢查井蓋cast iron manhole top
CJ/T 121 再生樹脂復合材料檢查井蓋composite material inspection well lid of regenerated resin
CJ/T 130再生樹脂復合材料水箅composite material water grate of regenerated resins
EN124-1 車輛和行人通過區域的排水溝蓋和人孔蓋 第一部分：定義，分類，一般設計，性能要求和試驗方法gully tops and manhole tops for vehicular and pedestrian areas part 1: definitions,classification,general principles of design,performation requirements and test methods
EN124-2車輛和行人通過區域的排水溝蓋和人孔蓋 第二部分：鑄鐵井蓋和水箅蓋gully tops and manhole tops for vehicular and pedestrian areas part 2:gully tops and manhole tops made of cast iron
EN124-3 車輛和行人通過區域的排水溝蓋和人孔蓋 第三部分：鐵或鋁合金井蓋和水箅蓋gully tops and manhole tops for vehicular and pedestrian areas part 3:gully tops and manhole tops made of steel or aluminium alloys
EN 124-4車輛和行人通過區域的排水溝蓋和人孔蓋 第四部分：鋼骨混凝土井蓋和水箅蓋gully tops and manhole tops for vehicular and pedestrian areas part 3:gully tops and manhole tops made of steel or aluminium alloys
EN 124-5車輛和行人通過區域的排水溝蓋和人孔蓋 第五部分：復合材料井蓋和水箅蓋gully tops and manhole tops for vehicular and pedestrian areas part 3:gully tops and manhole tops made of composite materials
EN 124-6車輛和行人通過區域的排水溝蓋和人孔蓋 第六部分：PP,PE,PVC-U井蓋和水箅蓋gully tops and manhole tops for vehicular and pedestrian areas part 3:gully tops and manhole tops made of polypropylene(PP),polyethylene(PE) or unplasticized poly(vinyl chloride)(PVC-U)
EN 1433 車輛和行人通過區域的排水溝蓋和人孔蓋 設計要求，型號試驗、標志drainage channels for vehicular and pedestrian areas-classification,design and testing requirements,marking and evaluation of conformity
3.試驗機技術參數
|
序號
|
項目
|
參數
|
|
1
|
試驗力
|
靜態試驗力600kN，1000KN
動態試驗力200KN
|
|
2
|
測量范圍
|
2%-100%FS
|
|
3
|
精度
|
1%
|
|
4
|
活塞行程
|
300mm
|
|
5
|
變形測量范圍
|
0-20mm
|
|
6
|
變形測量分辨率
|
0.01mm
|
|
7
|
試驗凈空間
|
1200x1200x1000mm
|
|
8
|
上壓頭尺寸
|
250mm
|
|
9
|
工作臺尺寸
|
1400X1400mm
|
|
10
|
加載速度
|
0.1-25KN/s
|
|
11
|
試驗速度
|
壓縮速度1400mm/min，拉伸速度2600mm/min；等效頻率范圍0.01~1hz
|
|
12
|
保護功能
|
Auto stop while real force exceeds 2% to 5% of max, force超過量程的2%-5%自動停機
|
|
13
|
電源
|
AC 380V,50Hz
|
|
14
|
主機尺寸
|
1400x1400x2100mm
|
|
15
|
主機重量
|
Around 4000kg
|
|
16
|
控制柜尺寸
|
1000x1600x1500mm`
|
|
17
|
控制柜重量
|
Around 1000kg
|
|
